Mon-Fri: 7AM-8PM, Sat: 8AM-6PM, Sun: 9AM-5PM Licensed & Insured [email protected] Serving Gardner, MA

Linear Opener Circuit Board Replacement in Gardner, MA

Failed logic boards and receivers replaced, often after a power surge. Typical cost $175-$400.

Garage doors rarely fail at a convenient time. If you need Linear opener circuit board replacement in Gardner, MA, we can often come out the same day when a technician is available. Failed logic boards and receivers replaced, often after a power surge. We work on Linear garage door openers of every age, from older models to current lines, and carry or can source compatible parts. Linear openers and remotes are now part of Nice North America. Linear's MegaCode remotes are common on older openers and gate systems.

When to call for Linear opener circuit board replacement

  • The opener is completely dead even though it has power
  • It worked until a storm or power surge
  • Random operation or no response to any control
  • Diagnostic lights showing a board fault

Common causes

  • Power surges and lightning
  • Heat and moisture damage
  • Age

Before the technician arrives

  • Reset the breaker and try a different outlet.
  • Unplug the opener for a minute, then plug it back in.

Still stuck? Our free symptom checker and troubleshooting wizard walk you through it step by step.

How we handle Linear opener circuit board replacement

  1. Confirm power and rule out sensors and controls
  2. Replace the logic board or receiver
  3. Reprogram remotes
  4. Set the limits and force
  5. Recommend surge protection

On older openers, a new opener can cost about the same as a board and adds current safety and security features.

Typical Linear opener circuit board replacement prices

$175-$400Typical range, parts & labor
about 1 hourTypical time on site

What moves the price:

  • Drive type: chain, belt, screw or wall-mount
  • Whether the fix is a part or a whole new opener
  • Remotes, keypads and smart accessories
  • Ceiling height and rail extensions

These are typical U.S. ranges, not a quote. You get an exact price for your door before any work starts. For a quick estimate, try the repair cost calculator.

Other Linear services

Serving Gardner, MA and nearby towns

Openers in Massachusetts work against stiff cold-weather grease in winter and hot, humid garages in summer, so travel limits and force settings often need a seasonal adjustment.

Technicians serve all of Gardner (ZIP code 01440), plus Templeton (3.8 mi), Baldwinville (4.6 mi), Westminster (4.9 mi) and Ashburnham (6.2 mi). Call (833) 435-8883 to book a visit in Gardner.

Linear Opener Circuit Board Replacement: frequently asked questions

How much does Linear opener circuit board replacement cost in Gardner, MA?

Linear Opener Circuit Board Replacement typically costs $175-$400 including parts and labor, and usually takes about 1 hour. The exact price depends on your door and the parts it needs, and you get it before any work starts. Call (833) 435-8883 for a quote.

Can you do Linear opener circuit board replacement the same day?

Often, yes. When a technician is available we can usually come the same day, and common parts are carried on the truck. Doors that won't close or have a broken spring are treated as priority calls, and emergency service is available.

Is Linear opener circuit board replacement covered by a warranty?

Our work comes with a 90-day labor warranty on repairs. New parts and doors also carry the manufacturer's warranty, and Linear warranty terms vary by product and age. Ask for the warranty details in writing with your quote.

Are your technicians licensed and insured?

Our technicians are insured, and where Massachusetts or Gardner requires a contractor license for garage door work, the job is done under that license. You're welcome to ask for proof when you book.

Should I repair or replace my opener?

A good rule of thumb: if the repair costs more than about 50% of a replacement, or the opener is near the end of its life, replace it. Most openers last 10 to 15 years. If yours is older than that, lacks photo eyes or rolling-code security, or needs a logic board or motor, a new opener is often better value. Springs are the exception: a broken spring is always replaced, never repaired. Our free repair vs. replace calculator can help you compare.

More services

Popular Garage Door Services in Gardner, MA

Wayne Dalton Garage Door Cable Repair

Wayne Dalton is part of the Overhead Door Corporation. Many Wayne Dalton doors use the TorqueMaster spring system, with the springs sealed inside the torsion tube, so spring work needs TorqueMaster parts and a different procedure.

Typical $150-$350

Wood Garage Door Repair

Rotted, warped or split wood sections repaired, sealed and rebalanced.

Typical $200-$700

Rytec High-Speed Door Repair

Rytec specializes in high-speed doors for warehouses, manufacturing and cold storage.

Typical $400-$2,000

Stanley Remote & Keypad Programming

Stanley garage door openers are no longer made. Compatible remotes and some parts are still available for older units.

Typical $50-$150

Genie Garage Door Opener Repair

Genie is the residential opener brand of the Overhead Door Corporation. Genie openers use Intellicode rolling-code remotes, Genie is one of the few brands still offering screw-drive openers, and newer models connect to the Aladdin Connect app.

Typical $125-$350

Chain Drive Opener Repair

Chain-drive openers repaired, re-tensioned or replaced.

Typical $125-$350

Weather Seal Replacement

New bottom seals, threshold seals and perimeter stops to keep out water and drafts.

Typical $100-$300

Ryobi Garage Door Opener Repair

Ryobi's garage door opener can use the brand's 18V ONE+ batteries as backup power and has accessory ports for add-ons.

Typical $125-$350

Chamberlain Garage Door Opener Repair

Chamberlain is the retail line of The Chamberlain Group, sold at home centers. It uses the same Security+ 2.0 remote technology and myQ app as LiftMaster, so many accessories work with both brands.

Typical $125-$350

Wayne Dalton Garage Door Track Repair

Wayne Dalton is part of the Overhead Door Corporation. Many Wayne Dalton doors use the TorqueMaster spring system, with the springs sealed inside the torsion tube, so spring work needs TorqueMaster parts and a different procedure.

Typical $150-$400

Genie Smart Garage Door Opener Setup

Genie is the residential opener brand of the Overhead Door Corporation. Genie openers use Intellicode rolling-code remotes, Genie is one of the few brands still offering screw-drive openers, and newer models connect to the Aladdin Connect app.

Typical $100-$900

Sommer Garage Door Opener Installation

Sommer openers, made in Germany, put the motor on a carriage that travels along the rail instead of hanging from the ceiling, so servicing them is a little different from a conventional opener.

Typical $350-$800

Garage door stuck, noisy or broken?

Talk to a garage door technician in Gardner, MA now. Tell us what the door is doing and we'll give you a price and an arrival window.

Call NowFree Quote